- Messages : 3
- Remerciements reçus 0
Résolution de problème : merci de consulter la FAQ et le Wiki
Aidez-nous à améliorer le contenu du Wiki et de la FAQ en les consultant. Le Wiki est mis à jour régulièrement et la FAQ permet une résolution rapide des principales embûches rencontrées. N'hésitez pas à nous faire parvenir vos suggestions d'amélioration sur le forum ou à éditer directement le Wiki ou la FAQ .
XBee & Enttec USB Pro [SOLVED]
- Zebru
- Auteur du sujet
- Hors Ligne
- Nouveau membre
First time posting so a bit excited. First of all, congratulation for Dlight, it's such a great tool!
The thing is that I'm trying to combine in the same computer (MAC MINI, 10.10) an Enttec USB Pro and also a Xbee. Is that even possible? I think both of them use FTDI driver (Xbee for sure).
I can use them separately but when I connect Dlight with the Enttec, it asks a password and then the Xbee doesn't work. I have read in another post that when it asks the password, Dlight unload the FTDI drivers. Is that right?
So the question is, can I use both devices in one computer?
Thank you very much in advance!
Connexion pour participer à la conversation.
- sl1200mk2
- Hors Ligne
- Administrateur
- Messages : 10094
- Remerciements reçus 958
thanx, hard work though....First time posting so a bit excited. First of all, congratulation for Dlight, it's such a great tool!
it should be possible with OLA server.The thing is that I'm trying to combine in the same computer (MAC MINI, 10.10) an Enttec USB Pro and also a Xbee. Is that even possible? I think both of them use FTDI driver (Xbee for sure).
within DL 4.0.3, latest OLA server is included
if you know nothing about OLA, there are some stuff on the wiki:
getdlight.com/wiki/index.php/OLA
specifically for the xbee, here's a thread about openlighting and xbee:
groups.google.com/forum/#!topic/open-lighting/BJMi4hN6jAQ
++
nicolas
Connexion pour participer à la conversation.
- sl1200mk2
- Hors Ligne
- Administrateur
- Messages : 10094
- Remerciements reçus 958
dmxking.com/led-pixel-control/ledmx4-pro
thus you could use (thanks to OLA) usbPro AND artnet/sacn.
the LeDMX will drive for you any of the WS2811/2812/APA104, APA102, WS2801, LPD880x, LPD6803 ledstrip
++
nicolas
Connexion pour participer à la conversation.
- Zebru
- Auteur du sujet
- Hors Ligne
- Nouveau membre
- Messages : 3
- Remerciements reçus 0
No response of lights at all! Do I need to install something else?
Thank you very much!
Connexion pour participer à la conversation.
- sl1200mk2
- Hors Ligne
- Administrateur
- Messages : 10094
- Remerciements reçus 958
for example, my Home directory is called nico, so OLA conf files are in:
/Users/nico/.ola
please note the . (dot) before ola which indicate it's hidden folders
once you can reach this folders, you'll find inside one called ola-usbserial.conf
make sure it looks like like that:
device_dir = /dev
device_prefix = ttyUSB
device_prefix = cu.usbserial-
enabled = true
pro_fps_limit = 190
tri_use_raw_rdm = false
ultra_fps_limit = 40
once you've modified it, click on 'reload plugins' from the OLA side and you should be able to select your usbPro for an universe.
please tell me how it's going on.
++
nicolas
Connexion pour participer à la conversation.
- Zebru
- Auteur du sujet
- Hors Ligne
- Nouveau membre
- Messages : 3
- Remerciements reçus 0
The problem was that besides the code you wrote in your last mail, another line was included:
device_prefix = ttyU
I just commented it and the enttec appeared in the outputs of the universe. Maybe this could help other people.
Thank you very much again!
Connexion pour participer à la conversation.